2.5 — Layout Preferences

2.5.1 Default Layout Type — VLS, 2LS, PAL (Mo Pinel), or NONE

Default Layout Type — VLS, 2LS, PAL (Mo Pinel), or NONE 2.5.1 layout The Default Layout Ty...

2.5.1.1 VLS — Storm system for bowlers using thumb

VLS — Storm system for bowlers using thumb 2.5.1a layout The VLS (Versatile Layout System)...

2.5.1.2 2LS — Storm system for two-handed bowlers

2LS — Storm system for two-handed bowlers 2.5.1b layout The 2LS (Two-Layout System) is a b...

2.5.1.3 PAL / Dual Angle system

PAL / Dual Angle system 2.5.1c layout The PAL (Performance Axis Layout) system — referred ...

2.5.1.4 NONE — Manual layout entry

NONE — Manual layout entry 2.5.1d layout When the None layout type is selected in Spectre ...

2.5.2 Default Dual Angle Degree Increments — 1° vs. 5°

Default Dual Angle Degree Increments — 1° vs. 5° 2.5.2 layout When entering drilling angle...

2.1.1 Changing the display language

2.1.2 How language affects measurement labels and UI text

2.2.1 Bowler Hand — setting your default (RH / LH)

2.2.2 Grip Type — Finger Tip vs. Conventional as default

2.2.3 Display in Decimal vs. Fraction (0.000 vs. fractions)

2.2.4 Oval Degree Increments — 1° vs. 5° increments

2.2.5 Insert Installation — STD vs. VACU grip default

2.2.6 Vacu Installation Increment from O.D. (1/32, 1/16…)

2.2.7 Display Measurements in — 16S+, 32ND, Decimal options

2.2.8 Display Pitches in — 16S+, 64TH, Decimal options

2.3.1 Default Hole Type — Round vs. Oval

2.3.2 Initial pitch inside the total oval — Edge vs. Center & Pitch Included Yes/No

2.3.3 Oval Width Calculator — Bit Size, Decimal, or Difference input method

2.3.5 Oval Cut 'Move' Direction — V/H, H only, V only, or None

2.3.6 Flip V/H on oval cuts — matching your drill press DRO display order

2.4.1 Does your machine display Right Pitch Positive? (YES / NO)

2.4.2 Does your machine display Forward Thumb Pitch Positive? (YES / NO)

2.4.3 Display +/- in pitch tiles — showing direction arrows to avoid errors

2.4.4 Matching Spectre output to your specific drill press brand/model

2.5.1 Default Layout Type — VLS, 2LS, PAL (Mo Pinel), or NONE

2.5.1.1 VLS — Storm system for bowlers using thumb

2.5.1.2 2LS — Storm system for two-handed bowlers

2.5.1.3 PAL / Dual Angle system

2.5.1.4 NONE — Manual layout entry

2.5.2 Default Dual Angle Degree Increments — 1° vs. 5°

2.6.1 Overview — why leaving all Auto-Suggestions ON saves time

2.6.2 Pitch Suggestion — auto forward pitch based on hand flexibility

2.6.3 Auto-CLT — lateral pitch of fingers based on CLT chart

2.6.4 Auto-Invert standard lateral pitches when changing from RH to LH

2.6.5 Autofill Bridge — auto standard bridge (1/4" Fingertip, 3/8" conventional)

2.6.6 Autofill Insert OD — auto drill bit size per insert type and grip

2.6.7 Auto-Repeat Insert Size — mirror size from ring to middle finger

2.6.8 Auto-calculate ring finger span based on 5/16" rule

2.6.9 Autofill Cut to Cut measurement based on insert type/size

2.6.10 Auto-Suggest Layouts — AI-based layout suggestion from bowler's profile

2.5 — Layout Preferences

2.5.1 Default Layout Type — VLS, 2LS, PAL (Mo Pinel), or NONE

2.5.1.1 VLS — Storm system for bowlers using thumb

2.5.1.2 2LS — Storm system for two-handed bowlers

2.5.1.3 PAL / Dual Angle system

2.5.1.4 NONE — Manual layout entry

2.5.2 Default Dual Angle Degree Increments — 1° vs. 5°

Search Results