5.3 — Method B: Horizontal Only (H Mode)
5.3.1 Setting up: Oval Cut Direction = H in Settings
Setting up: Oval Cut Direction = H in Settings 5.3.1 CALC oval method Before using the O...
5.3.2 When to use H-only mode and which drill presses it suits
When to use H-only mode and which drill presses it suits 5.3.2 oval method H-only mode in ...
5.3.3 Entering H-only cut values and reading output
Entering H-only cut values and reading output 5.3.3 oval method Once your Oval Cut Directi...
5.3.4 Worked example: H-only oval
Worked example: H-only oval 5.3.4 TIP example This page walks through a complete H-only ...