Create the Spec Sheet

To create the Spec Sheet

1. Click on (Add Spec Sheets )

   

   

   
   
2. When your full span is determined , register on both section   Exemple :

3. 

   

   

4. The flexibility must be indicated in order to determined what pitch of your thumb is suggested . Exemple :

   

   

   

5. If the bowlers use a slug or switch grip , it must be indicated in the "Thumb Inserts Type" Exemple:

   

   

   

6. Register the size of the slug by clicking on "O.D" section . Exemple : 

   

   

7. the Size of the slug is all set : 

   

8. Identify the pitch of both finger ( finger tip drilling) and wrote on "Reverse" section exemple: 

   

   

   

   
   
9. If the drilling is conventionnal , all pitch thumb and finger are forward in relation of the flexibility of the hand. Exemple if the pitch of the thumb are 1/4  the  fingers are the same !!!!
10. You can name your sheet and follow the history by click this section
    

11. 

12. Name or history on the sheet must be write here 

    EX:

13. Then click the check button 

    

     

    6.Your spec sheet is now set !