How to input a finger oval measurement ( no inserts)

  1. Find the right drill bit for both fingers at the measurement
  2. When it's found , register on " Hole Size" located on the Spec sheet 
  3. EX: 

    image.png

    image.png

    image.png

    image.png

  4. Next step is to find the oval width . When the size is selected , then calculate the difference in millimeter  between your finger drill bit and the oval width 
  5. Exemple : ring finger you found size 39/64 ( 0.609) - 35/64 ( 0.578)   = 0.031 
  6. Wrote the difference in the "Oval" section located on the spec sheet then press check button to confirm .
  7. EX:

    image.png

    image.png

    image.png

    For the Middle finger the process is exactly the same as the ring finger by determined  the oval width and making the difference from the drill bit .

     

    Exemple : oval width 5/8 ( 0.625)      then 5/8 (0.625) - 37/64 ( 0.578) =0.047

    image.png

    image.png

    image.png


Revision #2
Created 27 May 2025 15:20:58 by JP Côté
Updated 27 May 2025 15:53:14 by JP Côté