2.6.4 Auto-Invert standard lateral pitches when changing from RH to LH

Auto-Invert standard lateral pitches when changing from RH to LH 

 2.6.4   auto 

   

 The Auto-Invert setting controls whether Spectre Cloud automatically mirrors lateral pitch values when a spec sheet is switched between a right-handed (RH) and left-handed (LH) bowler — or when a new spec sheet is created for a left-handed bowler based on an existing right-handed template. Because lateral pitch directions are physically opposite for RH and LH bowlers, a value that is correct for one hand will be incorrect for the other without inversion. This setting handles that conversion automatically. 

 📐 Why Lateral Pitch Inverts Between RH and LH Bowlers 

 Lateral pitch is defined relative to the bowler's grip — specifically, toward or away from the ring finger side. Because the hands are mirror images of each other, a pitch direction that moves toward the ring finger on a right-handed bowler moves in the physically opposite direction on a left-handed bowler. If a spec sheet or template is copied across handedness without inverting lateral pitch, the drilled result will be a mirror-image error. 

 

 ✅ Right-handed bowler: lateral pitch toward the ring finger tilts the hole opening to the right when viewed from above. 

 ✅ Left-handed bowler: lateral pitch toward the ring finger tilts the hole opening to the left — the physical opposite direction. 

 ✅ Auto-Invert handles this conversion silently — the fitter sees the correct value for the bowler's hand without needing to manually reverse any figures. 

 ❌ Without Auto-Invert, copying a spec sheet or layout from a RH bowler to a LH bowler without manually checking and reversing lateral pitch values will produce an incorrectly drilled ball. 

 

 Note: Auto-Invert applies to lateral pitch values only — forward/reverse pitch and span measurements are not affected, as these do not change direction between RH and LH bowlers. ⚠️ Verify with your Spectre team: confirm the complete list of fields affected by Auto-Invert, and whether any additional values beyond lateral pitch are inverted. 

 🛠️ Enabling or Disabling Auto-Invert 

 

 Navigate to Settings from the top menu. 

 Locate the relevant settings section. ⚠️ Verify with your Spectre team: confirm the exact section name for 2.6.x settings, consistent with earlier pages in this chapter. 

 Find the Auto-Invert option. 

 Toggle the setting on or off. ⚠️ Verify with your Spectre team: confirm whether this is a toggle, checkbox, or other control. 

 The change takes effect immediately for all subsequent handedness changes and spec sheet operations involving a switch between RH and LH. ⚠️ Verify with your Spectre team: confirm auto-save behavior, consistent with other settings in this chapter. 

 

 📊 Auto-Invert in Common Workflows 

 Auto-Invert is most relevant in three specific situations. In each case, enabling the setting means the fitter can proceed without manually checking and reversing lateral pitch values. 

 

 

 

 Workflow 

 Without Auto-Invert 

 With Auto-Invert 

 

 

 

 

 Cloning a RH spec sheet for a LH bowler 

 Lateral pitch values carry over unchanged — must be manually reversed before drilling 

 Lateral pitch values are automatically mirrored on clone 

 

 

 Switching a bowler's handedness setting on their profile 

 Existing lateral pitch values remain as entered — no automatic correction 

 Lateral pitch values on associated spec sheets are updated to reflect the new handedness 

 

 

 Creating a new LH spec sheet using a RH template 

 Template lateral pitch values must be manually inverted before use 

 Template lateral pitch values are automatically mirrored when applied to a LH bowler 

 

 

 

 Note: ⚠️ Verify with your Spectre team: confirm which of the three workflows above Auto-Invert actually applies to in the current version of Spectre Cloud, and whether "switching a bowler's handedness on their profile" retroactively updates existing spec sheets or only affects new ones created afterward. 

 🔗 Relationship to Other Auto-Suggestion Settings 

 Auto-Invert works alongside the other auto-suggestion settings in chapter 2.6. It is most closely related to Auto-CLT (2.6.3), since CLT-based lateral pitch suggestions are also direction-sensitive. 

 

 ✅ When both Auto-CLT and Auto-Invert are enabled, a CLT-based lateral pitch suggestion generated for a LH bowler will already reflect the correct direction — Auto-Invert and Auto-CLT work in the same direction, not against each other. 

 ✅ Auto-Invert also applies to manually entered lateral pitch values, not just auto-suggested ones — any lateral pitch on a cloned or templated sheet is subject to inversion when handedness changes. 

 ✅ The inverted value respects the right pitch as positive sign convention set in 2.4.1 — the sign will flip correctly for the LH bowler's convention. ⚠️ Verify with your Spectre team: confirm that Auto-Invert correctly interacts with the 2.4.1 sign convention setting for LH bowlers. 

 

 ⚙️ When to Consider Turning Auto-Invert Off 

 

 ✅ Shops that never clone specs across handedness — if your shop always builds LH spec sheets from scratch, Auto-Invert has no effect and can safely be left off without risk. 

 ✅ Training new staff — disabling Auto-Invert requires trainees to consciously identify and reverse lateral pitch values when working across handedness, reinforcing the underlying geometric logic. 

 ✅ Workflows with manual handedness management — some shops maintain separate template sets for RH and LH bowlers and prefer explicit control over every value rather than automatic inversion. 

 ❌ Turning Auto-Invert off in a shop that regularly clones specs or shares templates across RH and LH bowlers significantly increases the risk of drilling an incorrectly pitched ball — the error may not be caught until the bowler has thrown several games. 

 

 📌 A Note on Ambidextrous Bowlers 

 Some bowlers throw with both hands — for example, switching to their non-dominant hand for spares. If separate spec sheets exist for both hands, Auto-Invert ensures that lateral pitch values are correctly oriented for each hand when spec sheets are created or cloned across handedness. 

 

 ✅ Maintain separate bowler profiles or clearly labeled spec sheets for each hand. 

 ✅ When creating the second-hand spec sheet from the first, Auto-Invert will handle lateral pitch direction automatically. ⚠️ Verify with your Spectre team: confirm whether Spectre Cloud supports recording both RH and LH spec sheets under a single bowler profile, or whether separate profiles are required for ambidextrous bowlers. 

 

 ☁️ Scope of This Setting 

 This setting is stored at the account level and applies to all spec sheet operations across all devices. ⚠️ Verify with your Spectre team: confirm per-user vs. per-account/shop scope — resolving this question here and applying it retroactively across all affected pages from 2.3.5 onward remains an outstanding action for the Spectre team. 

 Related Sections 

 

 2.6.3 — Auto-CLT: lateral pitch of fingers based on CLT chart 

 2.6.2 — Pitch suggestion: auto forward pitch based on hand flexibility 

 2.6.1 — Overview: why leaving all auto-suggestions on saves time 

 2.6.5 — Next auto-suggestion setting (if applicable) 

 2.4.1 — Does your machine display right pitch as positive? Y/N 

 3.x — Bowlers: recording handedness in a bowler profile 

 4.x — Spec Sheet: cloning and applying templates 

 

 Tip: Left-handed bowlers make up roughly 10–15% of the bowling population — a busy shop will fit several per week. Auto-Invert is a small setting with a disproportionately large safety payoff: one enabled toggle prevents a whole category of handedness-related drilling errors from ever reaching the press. 

 ```